> Treverzat@aol.com wrote:
> >I'm in the market for a new ignition setup. I've decided on the MSD-6A
> >ignition control so far. It seems everyone has had good luck with them.
My
> >questions are: Do I need to also get a new coil?
Don't have to get a new coil, but you should consider it...
What wires have seemed to
> >work the best? (Taylor, Magnecor, Splitfire, etc.)
Magnecor or MSD 8.5's (MSD= 48ohm on my longest wire..)
> >What dist. cap should I get (if any)?
BRASS.. borg warner or other..
> > And finally, what plugs are the best?
Autolite 3923's... bar none, IMO.. check my dyno comparisons in my
previous post, and/or follow the link in the sig.. last graph on that
page..
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.4@88.95
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:40 EDT