Somewhere between 130 and 150 ft lbs. Muscles, Jay, muscles! :-)
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Woodruff, Jason
P
Sent: Monday, July 22, 2002 12:35 PM
To: DML (E-mail)
Subject: DML: Camber Bolt
Thanks to Ron Wong for getting me the FSM page on suspension alignment,
Ekstrand is using it too.
Anyways. Does anyone have a torque spec on the Camber and/or Caster bolts.
All I know is it's damn tight. I pushed as hard as I dared on my ratchet
wrench and it wouldn't budge. I'll buy a breaker bar today. Right now I'm
set at about .5deg positive, I'll be trying to get about 2 deg negative.
I'll let everyone know what kind of camber I can get out of it with the
Hotchkis drop on it.
Jay W
505/287 Dakota
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:06 EDT